Pecron PV300 330W Portable Solar Panels for Portable Power Stations with Adjustable Kickstand and Foldable Design

The Pecron PV300 is a 330W monocrystalline solar panel that boasts a high conversion efficiency of up to 23%, allowing it to convert more sunlight into clean energy and perform better than conventional panels in hot weather. This eco-friendly solar panel is designed to be part of a portable solar generator system, working seamlessly with Pecron's E600LFP, E1000PRO, E1500PRO, E2000LFP, and E3000 power stations (sold separately), making it ideal for outdoor activities and unexpected power outages.

The Pecron PV300 is equipped with MC4 connectors, ensuring compatibility with most solar generators on the market. Weighing only 28.7 lbs and featuring a super-thin, foldable design, this solar panel is easy to transport and can conveniently fit in the trunk of your car or any storage space.

When it comes to the panel's performance, the Pecron PV300 has a maximum power output of 300W, a power voltage (Vmp) of 34.5V, an open-circuit voltage (Voc) of 43.52V, a working current (Imp) of 8.69A, and a short-circuit current (Isc) of 9.56A. The cell efficiency is 22%, and the operating temperature range is -20°C to +60°C. The panel is also waterproof, with an IP67 rating.

If you encounter any issues with the Pecron PV300, there are a few things you can check:

1. Ensure that the electronic equipment or output interface has been properly connected. Try plugging it in again.

2. Make sure the solar panel is facing the sunlight in the correct direction. After confirming the position of the sun, readjust the panel's direction.

3. Avoid placing the panel in the shadow of trees, telegraph poles, or other obstacles.

4. Check if the surface of the solar panel is contaminated with dirt. If so, wipe it gently with a soft, wet cloth. Never use thinner or benzine.

5. Consider the environment or weather conditions. The generating capacity may be lower in cloudy weather.

It's important to note that the nominal maximum output power (rated output) of a solar battery is calculated according to the standard state, which means a surface temperature of 25°C and a sunlight intensity of 1000 W/m². However, the actual output may be lower due to factors such as the installation environment, weather, characteristics of the solar battery, and dirt on the panel surface. When only a part of the solar panels are exposed to sunlight, the power generation efficiency decreases, and the power output becomes weaker. To maintain optimal performance, ensure the solar panel is fully expanded and not shaded from the sun.

Pecron, as a brand, is committed to putting customers first and providing high-quality outdoor and emergency power solutions. The Pecron PV300 solar panel is a testament to their dedication to delivering eco-friendly and reliable power options for various applications.

product information: